GE GSF25XGWBB Owner's Manual And Installation Instructions page 22

MOVING THE REFRIGERATOR
LOADING THE RERIGERATOR
1
ONTO A HAND TRUCK
Leave all tape and door pads on doors until
the refrigerator is in its final location.
To move the refrigerator, use a padded hand
truck. Center the refrigerator on the hand truck
and secure the strap around the refrigerator.
DO NOT OVERTIGHTEN THE STRAP.
REMOVE THE BASE GRILLE
2
Remove the grille by removing the two Phillips
head screws.
Installation Instructions
22
If the refrigerator must go through
any entrance that is less than 38" wide,
the doors must be removed. Proceed to
Step 3.
DO NOT remove the handles.
If all entrances are more than 38" wide,
skip to Installing the Refrigerator.
DISCONNECT THE WATER COUPLING
3
(on some models)
If the refrigerator has a water dispenser,
there is a water line from the cabinet into
the bottom hinge on the freezer door that
must be disconnected.
To disconnect, push in on the white collar
of the coupling and pull out the tubing.
Bottom
freezer
hinge
White collar