Maytag MGDB835DC Use & Care Manual page 10

4.
Select the desired cycle
Steam model shown
Select the desired cycle for your load. See the "Cycle Guide"
for more information about each cycle. Not all cycles are on all
models.
5.
Adjust cycle settings, if desired
Steam model shown
You may adjust different settings, depending on whether you
have selected a Sensor Cycle, TImed Cycle, or Steam Refresh
Cycle. See the "Cycle Guide" for detailed information.
NOTE: Not all options and settings are available with all cycles.
Not all cycles are on all models.
Sensor Cycles:
You can select a different dryness level, depending on your
load, by touching DRY LEVEL to scroll to More, Normal, or
Less. Selecting More, Normal, or Less automatically adjusts the
dryness level at which the dryer will shut off. Dry Level can be
changed in the first 5-8 minutes of the cycle.
Sensor cycles give the best drying in the shortest time. Drying
time varies based on fabric type, load size, and dryness setting.
Timed Cycles:
When you select a Timed Cycle,
the default time appears in the
display. Touch "+" and "–" to
increase or decrease the time in
1-minute increments. Touch
and hold to change the time in 5-minute increments.
The default temperature may be changed by touching
Temperature until the desired dry temperature is lit.
Steam Refresh:
Reduces light wrinkles from loads left in the dryer too long.
Do not add dryer sheets.
10
6.
Select any additional options
Steam model shown
Add additional options such as Energy Saver or Static Reduce
by touching that option. If you will be unable to remove the load
promptly, select the Wrinkle Prevent options before touching
START.
NOTE: Not all options and settings are available with all cycles.
7.
Touch and hold START to begin cycle
Touch and hold START to begin the cycle.
8.
Remove garments promptly
after cycle is finished
Promptly remove garments after cycle has completed to reduce
wrinkling. If you will be unable to remove the load promptly, select
the Wrinkle Prevent option.