Adding New Channels; Skipping Channels - Vizio E370VP User Manual

E370VP / E420VP

Adding New Channels

Occasionally, you may need to add a new analog channel or add a new range of
channels. You can do this by using the Partial Channel Search and Add Analog
Channel options.
This setting is only available when viewing the TV input.
To add a range of new channels:
1. From the Settings menu, highlight Partial Channel Search. The Partial
Channel Search menu is displayed.
2. Highlight Scan Mode and select the type of channel you are adding:
Analog, Digital, or Analog/Digital.
3. Highlight From Channel and enter the channel from which you want to
begin the scan. (Use the Number Pad on the remote to enter the channel.)
4. Highlight To Channel and enter the channel to which you want to end the
scan. (Use the Number Pad on the remote to enter the channel.)
5. Highlight Start and press OK. The partial channel search begins.
6. Wait until the partial channel search is 100% complete. Highlight Done and
press OK.
7. Press the EXIT button on the remote.
To add a single new analog channel:
1. From the Settings menu, highlight Add Analog Channel. The Add Analog
Channel menu is displayed.
2. Highlight Enter Channel # and use the Number Pad on the remote to
enter the number of the channel you are adding.
3. Highlight Add Channel and press OK. The TV scans for the channel.
4. When the TV is done scanning for the channel, press the EXIT button on
the remote.

Skipping Channels

After a channel scan is completed, you may find that some channels are too weak
to watch comfortably. There may also be some channels you do not want to view.
You can remove these channels from the TV's memory with the Skip Channel
feature.
Channels that have been removed with the Skip Channel feature can
still be viewed if the channel is entered using the Number Pad. If
you wish to completely block a channel from being viewed, use the
parental controls. See Using the Parental Controls on page 20.
To remove a channel:
1. From the Settings menu, highlight Skip
Channel. The Skip Channel menu is
displayed.
2. For each channel you wish to remove,
use the Up/Down Arrow buttons on
the remote to highlight the channel and
press OK. An X appears to the right of
each channel you select.
3. When you have selected all of the
channels you wish to remove, press
the EXIT button on the remote.
5
19