TENSIONING THE BELT
If the running belt slips when used, use the supplied 8mm Allen wrench to
turn the left and right tension bolts clockwise
/
-turn at a time until the belt
1
4
no longer slips.
CENTERING THE BELT
If the running belt is too far to the right side, use the supplied 8mm Allen
wrench to turn the right tension bolt clockwise
1
/
-turn at a time until the
4
belt remains centered during use.
If the running belt is too far to the left side, turn the left tension bolt
clockwise
1
/
-turn at a time until the belt remains centered during use.
4
37