General Safety Requirements; Operation; Pat Testing - Prem-I-Air EH1208 Quick Start Manual

Do not place this appliance within 200 mm (8") of curtains or similar items.
Ensure that the appliance stands upright at all times.
Do not use this appliance in the immediate surroundings of a bath, shower or
swimming pool.
Do not place the mains lead beneath a carpet or rug.
Do not use this appliance in locations where paint, petrol or other flammable
liquids are used or stored.
Do not insert any object into this appliance through the grilles. This may
damage the heater or result in overheating or electric shock.
Do not leave the product unattended for long periods of time.

GENERAL SAFETY REQUIREMENTS

Domestic wiring must be tested periodically by a qualified electrician at least
once every 10 years or at every change of occupancy.
For office and retail premises, and buildings such as village halls, the wiring must
be inspected at least once every 5 years.
It is recommended that all building be fitted with smoke alarms (it is mandatory
for new buildings).
Plug the mains lead from the power supply into a 13 Amp mains socket.
Plug the other lead from the power supply into the socket on the rear panel
of the appliance.
If connecting via an extension lead, make sure that the lead is rated at 3
Amps, and that it is fully unwound.
Place the appliance on a firm flat level surface.
Switch on at the mains socket.
Press the on/off switch (on the main unit) to start the unit.
If the yellow "FULL" indicator lights, empty the bucket.
Unplug the unit from the mains when not in use.
Check the unit regularly for damage and cease using it immediately if any
damage to the product, the cable or the mains plug is found.
When used in a workplace, this product must be safety-tested yearly by a
qualified electrician (PAT Tested) in order to comply with the Electricity at Work
Regulations.
We recommend that it is PAT tested regularly when used in a domestic
environment.
At time of going to press, the average cost of electricity is £0.12 per unit (kilowatt-
hour). The amount you are being charged will be shown on your electricity bill.
At this cost, the EH1208 will cost £0.11 per day to run.

OPERATION

PAT TESTING.

OPERATING COSTS
Page 3