Hydro Belt Replacement - Swisher ZT2760A Owner's Manual

Hydro Belt Routing & Replacement
Removal
Disconnect spark plug wire
Apply parking brake
Disconnect wiring from electric clutch
Remove clutch stop weldment (9973TK)
Remove the engine to deck belt
Disconnect idler spring
Disconnect tension idler
Remove belt from the engine pulley and from
the Hydro pulleys
For replacement belt part number refer to Replacement Parts
SERVICE & ADJUSTMENTS
Idler Pulley
Quick Reference Chart in this manual
Replacement
Install new belt by placing it around
the engine pulley and the hydro
pulleys. Refer to routing diagram
below.
The belt will be loose at this time
Tightly secure the belt tension back
to its original position
Reinstall the belt from the engine to
the deck
Reconnect wiring to the electric
clutch
Reconnect spark plug wire
Engine Pulley
21
21