Table of Contents
Advertisement
CUSTOMER RESPONSIBILITIES/SPECIFICATIONS
V-Belts
Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. Replace belts if
they begin to slip from wear. SEE SPECIFICATION for belt part numbers and SERVICE section of this manual for
instructions on how to replace the belt.
Engine
REFER TO YOUR ENGINE OWNERS MANUAL
Overall Unit Care
Reduce the risk of fire by removing grass, leaves, and other debris that may have accumulated on the
machine. Allow the machine time to cool before cleaning or putting it in storage.
Wash mower periodically. Clean above and below deck.
Keep all electrical connections clean and tight.
Driving and Transport on Public Roads
Check applicable road traffic regulations before driving and transporting on public roads.
If the machine is transported, you should always use approved fastening equipment and ensure that the
machine is well anchored.
The cutting deck should also be lowered to the lowest position and the parking brake engaged.
SPECIFICATIONS
GASOLINE CAPACITY
AND TYPE
OIL TYPE (SPI-SF-SJ):
SPARK PLUG
GROUND SPEED
TIRE SIZE
TIRE PRESSURE
BATTERY
HYDRO Bolt Torque
BLADE BOLT TORQUE
CUTTING HEIGHT
CUTTING WIDTH
PARKING BRAKE
FRONT AXLE
SEAT
TRANSMISSION
DECK LIFT
UNIT MEASUREMENTS
DUAL 2.0 GAL TANKS
UNLEADED REGULAR
SEE ENGINE MANUAL
SEE ENGINE MANUAL
0 – 6 mph
FRONT: 4.10x3.5-5 5/8 Bearing
REAR: 18 X 9.5 X 8
FRONT: 50 psi Max
REAR:
22 psi Max
12V / Heavy Duty 275 CCA
Type U1L
27 + - 3 ft. lbs
35 ft. lbs
1.5" – 5"
60" – 3 Mulching Blade System
Spring Assisted
Pivoting
15" Back w/ Arm Rest
6" Adjustable Slide
Commercial Grade Eaton Hydrostatic
Spring Assisted
LENGTH:
70"
WIDTH:
60 1/4 "
Including Deck
WEIGHT:
600 lbs
12
12
Advertisement
Table of Contents
