AEG OKO-LAVAMAT 84760 User Information page 38

Instructions for use
Problem
Washing is not spun.
Remaining water is vis-
iblein the drum.
Error code
Door cannot be opened
when appliance is
switched on.
Detergent remains
form inthe washing
powder/liquid drawer.
Rinse water is cloudy.
When pressing an addi-
tional programme but-
ton, the
correspondingdisplay
does not light up.
Programme cycledis-
play blinks constantly.
38
There is a kink n the drainage
hose.
Maximum pump height
(emptying height 1m from
base surface of the appli-
ance) is exceeded.
(2 .
appears
Water pump is blocked.
At the siphon connection: Si-
phon is blocked.
Door is locked for safety rea-
sons (display DOOR/LIGHT is
Off).
Programme security is
switched On.
Water tap is not fully
opened.
Filter in the socket of the in-
flow hose at the water tap or
the appliance is blocked.
The reason is probably a de-
tergent with a high silicate
content.
The selected additionalpro-
gramme cannot be combined
with the set programme.
Programme security is
switched On; during the
wash cycle the programme
knob has been moved.
Possible cause Remedy
Remove kink.
Refer to the customer
service. For pumping heights
over 1m, they have a supple-
mentary set as special spares
available.
Switch off appliance and pull
out electric plug. Clean wa-
ter pump.
Clean siphon.
Wait till display DOOR/LIGHT
(DEUR/LICHT, PORTE/ECLAIR.)
lights up green.
Cancel programme security
(see section „Programme se-
curity").
Open water tap fully.
Close water tap. Disconnect
inflow pipe from water tap
and from the appliance and
clean filter.
No negative effect on the
rinse results; possibly use a
liquid detergent.
Make another selection.
Turn programme knob back
to its original position (see
„Programme security").