Call Timer; Call Cost; Gprs Info - Pantech GF260 Manual

Press the [Option] Soft key [
n
Delete: Deletes the dialled call record being indicated by the list
n
Delete All: Deletes all the dialled call record from the list.
n
Send Message: Sends a message to the dialled call record.
When the call is not found in Contact, the
created.
3.4 Delete Call Logs
Select ' Menu>3.Call Logs>4.Delete Call
It deletes the missed, received, or dialled calls or deletes all the call
records with ' All Calls'.
Press the [Yes] Soft key [ ] or [No] Soft key [
this function.
3.5

Call Timer

Select 'Menu>3.Call Logs>5.Call
Notifies the information on call time.
Last Call Time: Date and Time.
-
Received, Dialled, All Call
-
Reset Call Times: Initializes call timer. Press the [OK] key and
-
input the phone password. And then press the [ O K] key one
56
] to;
[Save Number] option will be
Logs' .
] to execute or cancel
Timer' .
Time: Call Time only.
more time.
3.6

Call Cost

Select 'Menu>3.Call Logs>6.Call
Records the information on call cost, and limits the call charge to prevent
overcharge.
Last Call Cost: Displays the cost of the last call.
-
All Call Cost: Displays the cost of all calls.
-
Clear Logs: Inputs PIN2 to delete all the logs of call cost.
-
Max Cost: Reads or sets up the maximum value of the call cost
-
unit in the service area.
This function has the following sub options.
- Read Limit: Reads the maximum unit value.
- Set Limit: Sets up the maximum units.
- Cost Unit: Reads or sets up the unit defined in a service area.
This function has the following sub options.
- Read Unit: Reads the cost unit.
- Set Unit: Sets up the current cost unit and the cost per unit.
3.7

GPRS Info

Select 'Menu>3.Call Logs>7. GPRS
It displays the GPRS data transmission capacity.
- Current Info: Displays the total transmission Kbytes at the
Cost' .
Info' .