Call Timer; Call Cost; Gprs Info - Pantech S100 User Manual

Call Timer

This function displays information on call times.
Press the [Menu] Soft key then select
Timer. The following information is displayed.
•
Last Call Time: Displays the last call's length, date and time.
•
Received, Dialed, Total Call
•
Reset Call Times: Resets the call timer. To confirm the resetting
of all call times, input your phone's password then press the [OK]
key.

Call Cost

This function records information on call cost and limits the call
charge to prevent you from exceeding your subscription charge.
Press the [Menu] Soft key then select
Cost. The following information is displayed.
•
Last Call Cost: Displays the cost of the last call.
•
Total Call Cost: Displays the cost of all calls.
•
Clear Logs: If you input your PIN2 password, this function
deletes all call cost logs.
•
Max. Cost: Reads or sets the maximum call cost within the
service area:
Read Limit: Reads the maximum number of units.
Set Limit: Sets the maximum number of units.
•
Cost Unit: Reads or sets the cost unit for the service area.
Read Unit: Reads the cost unit value.
Set Unit: Sets the current cost unit value and the cost per
50
3.Call Logs then select 6.Call
Time: Displays the total call time.
3.Call Logs then select 7.Call
unit.
GPRS Info.
This function displays the following information on the volume of
GPRS data transmitted.
Press the [Menu] Soft key then select
8.GPRS Info. The following information is displayed.
Current Info.: Displays the total volume of GPRS data transmitted in
the current session, in Kbytes.
Last Info.: Displays the total volume of GPRS data transmitted in
previous sessions, in Kbytes.
Total Info.: Displays the total volume of GPRS data transmitted and
received, in Kbytes.
Clear Logs: Clears the logs recording how much GPRS data you
have transmitted.
3.Call Logs then select