Clarity XLC8 User Manual page 18

To use a
connect your cell phone(s) with the telephone base. All
handsets can be used to make or answer calls on the cell line. Your cell line is
the telephone line associated with your cell phone service.
ireless
approximately 30 feet). When you pair a
telephone base, place your
telephone base to maintain sufficient signal strength. For optimal
performance, keep your cell phone within 15 feet of the telephone base
while using the cell line.
PAIR AND CONNECT YOUR
Choose a slot to pair the cell phone. Press and hold
telephone base until you hear a confirmation tone, and the
2 light flashes.
Turn on the
. Once your cell phone finds your Clarity phone (Clarity
the appropriate key on your cell phone to continue the pairing process.
• Your cell phone may prompt you to enter the PIN of the telephone base.
The default PIN of the telephone base is 0000.
When the cell phone is connected to the telephone base, the
corresponding status icon (
device light (
If the pairing fails, turn off the feature on your cell phone and on the
by pressing
connect again. In some cases, it may take you a few attempts to complete
the pairing process.
PAIR AND CONNECT YOUR
Press MENU on the phone when it is not in use. Press MENU again to select
Press the UP or DOWN arrow keys to scroll to Add Headset, and then press
MENU. The screen displays Search headset....
Set your headset to discoverable mode. Once your handset finds your
headset, press MENU to select it.
• Enter the PIN of your headset if required. The PIN for most
devices is 0000 (refer to the user's manual of your headset), and then
press MENU.
When the headset is successfully paired and connected to the telephone
base, the 2 icon displays, and the
enabled cell phone with your
technology operates within a short range (a maximum of
feature of your cell phone
1 or 2) turns on.
1 or 2. Then repeat the steps above to pair and
cell phone closer to the
ENABLED CELLPHONE
1 or 2) displays. The corresponding
-ENABLED HEADSET
2 light on the base turns on.
, you must first pair and
and
cell phone to the
1 or 2 on the
1 or
), press
15