Door Replacement - Viking VGR736 Installation Manual

Installation
locator graphic
Proper alignment of Burner Head
When placing the burner head on the burner base,
carefully align the locator key in the outer edge below the
burner ports with the small notch in the top front edge of
the burner base. This will align the burner port with the
ignitor. When properly installed, the locator graphic will
be aligned with the ignitor and opposite the locator pin.
locator pin burner base notch

Door Replacement

1
2
1
1
Reattach door to range.
Open door completely. Fold latches forward until
locked in place.
3
Close door.
25