Table of Contents
Advertisement
Installation
1
Connect the Hardware
1.
Place the Hub no more than three feet from the dongle.
2
2.
Power OFF the Hub and disconnect it from all USB
devices (e.g., cameras, hard drives, scanners).
3
3.
Connect the external antenna and the power supply to
the Hub.
4
4.
Ensure that the dongle and Hub are facing each other.
5.
Connect the dongle to the PC's high-speed USB
5
port. The system will automatically detect and begin
installation of the drivers for the connected dongle
using the Found New Hardware Wizard.
6
Proceed as follows:
1.
Select "No, not this time", and click "Next".
Figure 3: Found New Hardware Wizard
8
8
8
Advertisement
Table of Contents
