Table of Contents
Advertisement
16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc
Page 14 of 108
D. Plug in your modem's power cord. Wait 60 seconds for the modem
to start up. Plug the Router's power supply into the black port on
the back. Plug the other end into the wall outlet.
[insert line art from QIG]
E. Wait 20 seconds for the Router to start up. Look at the display on
the front of the Router. Make sure the "Wired" and "Router" icons
are lit up in blue. If they are not, recheck your connections.
[insert lineart from QIG]
Step 2: Set Up the Router – Run the Setup Assistant Software
A. Shut down any programs that are running on your computer at this time.
Turn off any firewall or Internet-connection-sharing software on your
computer.
B. Insert the CD into your computer. The Setup Assistant will automatically
appear on your computer's screen within 15 seconds. Click on "Go" to run
the Setup Assistant. Follow the instructions there.
IMPORTANT:
Run the Setup Assistant from the computer that is directly connected to the Router from
Step 1 – B.
[Keep existing screenshots for Step2]
<Insert: EZI_1.tif>
Advertisement
Table of Contents
