Table of Contents
Advertisement
Storing Number
Storing Numbers
1. Be sure the BASE UNIT IN USE LED indicator is OFF and the HANDSET is in STANDBY
mode.
2. Press the
button.
MEMO
3. Dial the number you want to store.
4. Press the
button again.
MEMO
5. Dial the TELEPHONE KEYPAD
You will hear one confirmation "beep".
6. Write the name of the person you will be calling with that number next to the corresponding
index number on the TELEPHONE NUMBER CARD.
7. Repeat steps 1 through 6 to store other telephone numbers.
EXAMPLE: To store the number 115-1968 under the TELEPHONE KEYPAD
1 - Press the
button.
MEMO
2 - Dial 115-1968.
3 - Press the
button again.
MEMO
A total of 10 telephone numbers can be programmed in memory.
IMPORTANT:
The maximum number of digits that can be stored for any phone number is 16 in PULSE or
TONE mode. The maximum number of digits for mixed (TONE and PULSE in combination) dialing
is 15. If you are using a switchboard system to access an outside line (such as an 8 or 9),
press the
button
PAUSE
to store a PAUSE.
0
9
~
button where you want to store that number.
OPER
WXY
4 - Press the TELEPHONE KEYPAD
5 - You have stored 115-1968 under the TELEPHONE
1
KEYPAD
button.
13
1
button:
1
button.
Advertisement
Table of Contents
