ViewSonic N2060W User Manual page 14

Picture Setup
When the input source is in PC mode, shown in the figure below:
1. Brightness and Contrast: The range can be adjusted from 0~100.
2. Position: There are two options, Horizontal and Vertical, which can be
adjusted from -50 to +50.
3. Video noise: There are two options, Phase and Clock, which can be
adjusted from -50 to +50.
4. Sharpness: Select from six options Softest, Soft, Normal, Sharp, Sharpest
and Auto. You may adjust the above options according to your preference.
5. Auto Adjust: Auto-sizing function for VGA input..
6. Info: Prompt the current PC input resolution
7. Color Temp.: There are four options of color temperature provided for
users - Cold, Normal, Warm and Personal. You can select the three color
temperatures of Cold, normal and warm, or manually adjust manually red,
green or blue in the personal setting (you can only adjust red, green and
blue in the personal setting).
8. Reset to default: It is used to reset the picture settings to the factory
default mode.
ViewSonic 12 N2060w