Table of Contents
Advertisement
Recharge
Failure
Sleep Mode
Printing
Screen Print
Problems
Failure
ViewSonic Tablet PC V1250
The battery does not charge:
• Make sure the AC adapter is
plugged into a working power
source.
• The battery charge indicator LED
on the V1250 should be lit when
you plug in the AC adapter.
• Make sure the battery module is
fully inserted in its bay and that the
battery latch is in its locked
position.
• If the battery is operating at a very
high temperature, it may not accept
a charge.
The screen does not come out of
sleep mode.
• Tap the mouse pad with the stylus.
• Slide the power on switch once.
Twice will turn the unit on again.
The printer does not print what is on
the screen:
• If the printer prints strange
symbols, this can be the result of
garbage in the printer memory
buffer cache. Call off all the printer
tasks then toggle off the printer
power switch to clear up the
memory buffer. Turn the printer
back online and attempt to print
again.
• Make sure you have installed the
correct printer driver.
53
Advertisement
Table of Contents
