Operating Instructions; Cooling Mode; Airflow Setting; Fan Speed Setting - LG APNQ24GS1A4 Owner's Manual

OPERATING INSTRUCTIONS

Cooling Mode

|
1
Press button to turn on the indoor.
a
2
Press button to select Cooling
operation mode.
- When canceling operating, press
button once more.
3
Adjust the desired temperature by
pressing ( ) buttons.
- If desired temperature is higher than
room temperature, cooling cannot be
conducted.
- Set the temperature lower than the room
temperature
- Setting Temp Range : 18 °C~30 °C.
NOTE
!
What is 3 minutes delay function?
The reason that cold wind is not coming out
when operating the unit after turning off the
cooling is because of the function to protect
compressor. Cold wind will be coming out
when compressor is operated after 3 minutes.
Airflow Setting
We can simply adjust the desired airflow
direction.
Up/Down Airflow Direction Control
|
1
Press button to turn on the indoor.
I
2
Press button and the louvers will
swing up and down.
I
3
Press button again to set the horizontal
louver at the desired airflow direction.
Left/Right Airflow Direction Control
|
1
Press button to turn on the indoor.
J
2
Press button and the louvers will
swing left and right.
J
3
Press button again to set the vertical
louver at the desired airflow direction.

Fan Speed Setting

1
Press
2
Press
|
- You can select the fan speed in four
steps Low, Med, High, Super High.
Each time the button is pressed, the fan
speed mode is shifted.
- Air flow rate can be selected during the
cooling, dehumidification and blowing
mode.

Auto Operation Mode

1
Press
2
Press
Mode.
3
Adjust the desired temperature by
pressing (
- When room temperature is higher than
desired temperature, cooling operation
will be performed.
- The temperature established by customer
will be maintained through automatic
performance of cooling operation in
accordance with the change of room
temperature.
NOTE
!
Some functions may not be supported,
depending on the model.
OPERATING INSTRUCTIONS
|
button to turn on the indoor.
button to select fan speed.
|
button to turn on the indoor.
2
button to select Auto Operation
) buttons.
13