Robot Coupe HI Series Instruction Manual page 9

SPEED SELECTION
Before changing speeds, the mixer must always be STOPPED first. The necessary speed can then be
selected before restarting the machine by pressing the Green Start Button.
NOTE: The Model SPA-80HA, SPA-80A, SPB-80HA and SPB-80A
changed during operation.
The speed selected depends largely on the quantity and consistency of the product. It is recommended
that mixing is always started at the lowest speed and progressively increased to the desired setting. In an
emergency situation always use the Red Emergency Stop Button to stop the machine. Table 2 shows the
recommended speeds for the range of tools. For Model
refer to Table 3.
Recommended speed
st
1 Speed
Whisk
Beater
Hook
IMPORTANT:
When mixing products always follow the recommended agitator and speed setting.
The mixer is equipped with a motor overload protection. If the mixer shuts off during operation, reduce
the batch size and wait 2 minutes. Press the stop button then press the start button.
For heavier loads, the mixer should not run longer than 15 minutes without pausing for a cool down
period of at last 15 minutes or more before resuming mixer. For lighter loads the mixer should not run longer
than 30 minutes without pausing for a cool down period of at last 30 minutes or more before resuming
mixer.
Operating Instructions
nd rd
2 Speed 3 Speed
Table 2
will automatically shut off if the speed is
SPA-80HA, SPA-80A, SPB-80HA and
Recommended Speed
st
1 Speed
Whisk
Beater
Hook
8
SPB-80A, please
nd rd
2 Speed 3 Speed 4
th
Speed
Table 3