Page 2
www.robot-coupe.com Register your product on line...
Page 3
EU Declaration of Conformity Robot-Coupe® SNC declares that all the machines subject of these original • the provisions of the following harmonized European standards and the instructions, as well as their accessories and their packaging, comply with: standards specifying the safety and hygiene requirements: - EN ISO 12100:2010 Safety of machinery –...
SUMMARY WARRANTY CLEANING • Motor unit IMPORTANT WARNING • After each use INTRODUCTION TO YOUR • Blades NEW POWER MIXER • Whisk holder • Whisks SWITCHING ON THE APPLIANCE • Mixing tool housing • Advice on electrical connections • Mixing tool OPERATING THE APPLIANCE MAINTENANCE •...
ROBOT-COUPE ., LIMITED WARRANTY Labour to sharpen and/ or replacements SHIPPING DAMAGES. Visible and latent for blades which have become blunt, chipped or Your new ROBOT-COUPE appliance is defects are the responsibility of the freight worn after a normal or excessive period of use. carrier.
IMPORTANT WARNING W A R N I N G KEEP THESE INSTRUCTIONS IN A SAFE PLACE WARNING: In order to limit accidents such as electric shocks or personal injury, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly.
Litres instructions carefully before using the appliance. 220 V / 60 Hz. 350 mm MP 350 Ultra The machine is supplied with a single-phase • 350 mm MP 350 V.V. Ultra In blade function moulded plug. MP 450 Ultra...
8. Release the control button (CB). • MASHED POTATOES FUNCTION To make our machines more ergonomic, safer to (MP 350 Combi Ultra, MP 450 Combi Ultra, use and easier to handle, we recommend using the 9. Release the locking button (LB), and the power MP 450 FW Ultra) “removable handle”...
In this case, it is best to place your free hand on the While you process the handle guard (or at least as far away as possible preparation, we recommend from any moving and cutting parts). that you move the whisks around in the bowl, in order If using a support on top to ensure that the mixture is...
- Check that the machine is not plugged in. - To remove the blade safely, hold them with the tool provided or an oven glove or a thick cloth. - Align the flat side of A the conical part of the tube - Using the removal tool, the male driving coupling.
Removing the casing Removing the whisks from the whisk holder Line the flat side of the mixing tool B up with the flat - Check that the machine is not plugged in. Pull the ejector A in side of the housing A. direction to the arrow, - Turn the whisk holder in the opposite direction to Once the mixing tool has been attached to the...
- Ø pan: CLEANING CATERING AND RESTAURANT WORK from 330 mm to 650 mm. - Ø pan: Blade Function W A R N I N G • Soups from 500 mm to 1000 mm. As a precaution, always unplug your appliance •...
6) Carefully dismount the different parts of the • BLADES I M P O R T A N T bell using the tool provided taking care not The blades can be removed from the bell for tho- Check that your detergent is suitable for rough cleaning.
Procedure for replacing the power cord: Make sure the plug is pushed in far enough (two stages). If it is not, the control buttons will not work. 1) Use the dismantling tool supplied with the new replacement cord. After the cord has been 2) Press the push button (see photo) and pull on the connected to the handle and cord without releasing the dismantling tool.
1,500 to 9,000 is not immersed in anything is less than 70 dB (A). 220 V / 60 Hz 1,500 to 9,000 • ELECTRICAL DATA Single-phase machine MP 350 Ultra Single-phase machine MP 550 Ultra Speed Intensity Motor Speed (rpm) Intensity (Amp.)
Single-phase machine MP 350 Combi Ultra too thick or not suitable for processing with a stick SAFETY blender. To switch your appliance back on, follow Mixer Speed Whisk Speed Intensity the procedure for OPERATING THE APPLIANCE W A R N I N G Motor (rpm) (rpm)
• If you cannot locate the cause of the problem In this case, you can still restart your mixer. R E M I N D E R However, your machine will stop again if the - Release the control button (CB). consistency of the preparation is not modified.
Page 21
Head Office, French, Robot Coupe Robot-Coupe Export and Marketing Department: Australia Pty Ltd: U.K. LTD: 48, rue des Vignerons Unit 3/43 Herbert St Fleming Way, Isleworth, 94305 Vincennes Cedex- France Artarmon NSW 2064 Australia Middlesex TW7 6EU Tel.: 01 43 98 88 15 Tel.: (02) 9478 0300...