Table of Contents
Advertisement
4. LUBRICATION (DDL-9000B-S , -M )
WARNING :
1. Do not connect the power plug until the lubrication has been completed so as to prevent
accidents due to abrupt start of the sewing machine,
2. To prevent the occurrence of an inflammation or rash, immediately wash the related portions if oil
adheres to your eyes or other parts of your body.
3. If oil is mistakenly swallowed, diarrhea or vomitting may occur. Put oil in a place where children
cannot reach.
❶
❷
engraved
marker line
When you operate the sewing machine, refill oil if the top end of oil amount indicating rod ❸ comes down
3)
to the lower engraved marker line of oil amount indicating window ❷.
(Caution)
1. When you use a new sewing machine or a sewing machine after an extended period of disuse,
use the sewing machine after performing break-in at 2,000 sti/min or less.
2. For the oil for hook lubrication, purchase JUKI NEW DEFRIX OIL No. 1 (Part No. : MDFRX1600C0)
or JUKI MACHINE OIL #7 (Part No. : MML007600CA).
3. Be sure to lubricate clean oil.
4. Do not operate the machine with the oil hole cap ❶ removed. Never remove cap ❶ from the oil
inlet in any case other than oiling. In addition, take care not to lose it.
❸
Upper
engraved
marker line
Upper
Fill the oil tank with oil for hook lubrication before op-
erating the sewing machine.
Remove oil hole cap ❶ and fill the oil tank with
1)
JUKI NEW DEFRIX OIL No.1 (Part No. : MD-
FRX1600C0) or JUKI MACHINE OIL #7 (Part No.
: MML007600CA) using the oiler supplied with the
machine.
2)
Fill the oil tank with the oil until the top end of oil
amount indicating rod ❸ comes between the upper
engraved marker line A and the lower engraved
marker B line of oil amount indicating window ❷.
If the oil is filled excessively, it will leak from the
air vent hole in the oil tank or proper lubrication
will be not performed. In addition, when the oil is
vigorously filled, it may overflow from the oil hole.
So, be careful.
– 5 –
Advertisement
Table of Contents
