Table of Contents
Advertisement
The handset and the base
have independent redial
memories.
USING REDIAL
Use the
key to recall the last 3 numbers
redial/p
dialed from the handset or the last number
dialed when using the base. The redial
number can be up to 32 digits long.
To redial from the handset:
Press
redial/p repeatedly to display the
number you want to dial, then press line 1.
If you press line 1 before redial/p, only the
last number dialed can be accessed for redial.
To redial from the base:
Press
, then press
line 1
If any key is pressed before redialing, the
last number will not redial.
PLACING A CALL ON HOLD
Use either the keypad on the handset or the keypad on the base.
To place
on hold at the
line 1
base, press
. The
hold
from green to red.
To place
on hold at the
line 1
handset, press
.
hold
The following screen appears:
To pick up the call that is holding,
press
on the base or handset.
line 1
.
redial/p
LED turns
line 1
(Hold)
Line 1
19
Advertisement
Table of Contents
