Table of Contents
Advertisement
8
t Direct wall plate mounting
If you don't have a standard wall plate, you can
mount your phone directly to the wall. Before
doing this, consider the following:
Avoid electrical cables, pipes, or other items behind the mounting
l
location, that could cause a hazard when inserting screws into the wall.
l
Try to mount your phone within 10-15 feet of a working phone
jack to avoid excessive cord lengths.
l
Make sure the wall material is capable of supporting the weight of
the base and handset.
l
Use #10 screws (minimum length of 1 3/8 inches) with anchoring
devices suitable for the wall material where the base unit will be placed.
1.
Insert two mounting screws into the wall,
(with their appropriate anchoring device),
3-15/16 inches apart. Allow about 3/16 of
an inch between the wall and screwheads
for mounting the phone.
2. Refer to steps 1 through 9 on page 6 and 7
to mount the telephone.
Advertisement
Table of Contents
