Table of Contents
Advertisement
Secure the exhaust ducting to the
exhaust socket, e.g., with a hose clip
(available as an optional accessory)
on flexible ducting.
Insert the exhaust socket into the
exhaust opening and secure it by
turning it slightly clockwise.
See "Connection for vented mode"
for additional instructions on
attaching the ducting.
Preparation for recirculation
mode
Fit the charcoal filter (see "Cleaning
and care").
Power supply
Refer to the notes in "Electrical
connection" and "IMPORTANT
SAFETY INSTRUCTIONS" before
connecting to the electricity supply.
Connect the hood to the electrical
supply.
Functional check
To do this, switch the blower on.
– In vented mode, the air should not
come out of the recirculation grille at
the front of the hood.
– In recirculation mode, the air should
come out of the recirculation grille at
the front of the hood.
If this does not happen, the deflector is
not installed correctly (see "Deflector").
Installation
35
Advertisement
Table of Contents
