Super Io Configuration - ASROCK IMB-151N User Manual

3.3.5 Super IO Configuration

COM1 Configuration
Use this to set parameters of COM1. Select COM1 port type: [RS232],
[RS422] or [RS485].
COM2 Configuration
Use this to set parameters of COM2.
COM3 Configuration
Use this to set parameters of COM3.
COM4 Configuration
Use this to set parameters of COM4.
COM6 Configuration
Use this to set parameters of COM6.
LPT1 Port Configuration
Use this set parameters of the onboard parallel port.
CIR Controller Configuration
Use this set CIR controller.
WDT Timeout Reset
This allows users to enable/disable the Watch Dog Timer timeout to reset
system. The default value is [Disabled].
30