Table of Contents
Advertisement
The power cord connected to the outdoor unit should be
complied with the following specifications (Rubber
insulation, type H05RN-F approved by HAR or SAA).
NORMAL CROSS-SECTIONAL AREA
Capacity
1 Phase
30k Btu/h
5.5mm
36k Btu/h
5.5mm
42k Btu/h
48k Btu/h
60k Btu/h
1 Phase(1P)
If the supply cord is damaged, it must be replaced by a special cord or assembly availible from the manufacturer of its service agent.
CAUTION: Make sure that the screws of the terminal fixed tightly.
Connecting Cables between Indoor Unit and Outdoor Unit
3 Phase
2
-
2
2.5mm
2
-
2.5mm
2
3.5mm
2
-
-
3.5mm
2
3 Phase(3P4W)
CAUTION
The connecting cable connected to the indoor and outdoor
unit should be complied with the following specifications
(Rubber insulation, type H05RN-F approved by HAR or SAA).
NORMALCROSS-SECTIONA AREA 0.75mm
Cooling Only
2
(30/36/42k)
1.25mm
2
(48/60k)
Heat Pump
Installation Manual 23
Advertisement
Table of Contents
