Schwinn 570U Assembly Manual / Owner's Manual page 9

3. Install Handlebars on Console Mast
NOTICE: Do not crimp the cables. Put the Handlebar (7) in the bracket (6a), adjust the Handlebar to the desired
angle, and install the T-handle (E) through the holes. Use the pull cable in the Handlebar Mount to route
the HR cable (7a) through the slot (6c) under the Handlebar Mount to the top of the mast. Fully tighten
the T-handle to keep the Handlebar in position. Push the cover (16) into position on the Handlebar Mount.
7
6a
7
B
D
E
6c
E
7a
16
6a
6a
B
D
7
7a
E
9