Getting Started; Notifications & Features & Accessories; Features - JVC LT-32V250 Instructions Manual

Getting Started

Getting Started
Notifications & Features & Accessories
Standby Notifications
1. If the TV does not receive any input signal (e.g.
from an aerial or HDMI source) for 5 minutes, the
TV will go into standby. When you next switch-
on, the following message will be displayed: "TV
switched to stand-by mode automatically
because there was no signal for a long time".
Press OK to continue.
2. If the TV has been left on and not been operated
for a while, the TV will go into standby. When
you next switch-on, the following message will
be displayed. "TV switched to stand-by mode
automatically because no operation was made
for a long time". Press OK to continue.

Features

• Remote controlled colour TV.
• Fully integrated digital/cable TV (DVB-T/C)
• HDMI inputs are for connecting a device that has
a HDMI socket.
• USB input.
• OSD menu system.
• Scart socket for external devices (such as DVD
Players, PVR, video games, etc.)
• Stereo sound system.
• Teletext.
• Headphone connection.
• Automatic programming system.
• Manual tuning.
• Automatic power down after up to six hours.
• Sleep timer.
• Child lock.
• Automatic sound mute when no transmission.
• NTSC playback.
• AVL (Automatic Volume Limiting).
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98, ME, 2000, XP, Vista,
Windows 7, Windows 8.
• Game Mode (Optional).
Optional
The Word 'Optional' is used in these instructions to
specify when a feature, or function, is only available
on some models, or with some particular combination
of menu settings.
Accessories Included
• Remote Control
• Instruction Book
• Batteries:2 X AAA
• Quick Start Guide
• Stand installation instructions sheet
• Detachable stand and 7 screws
WARNING
To prevent fire, never place
any type of candle or open
flame on the top or near the TV set.
TV Control Switch & Operation
1. Up direction
2. Down direction
3. Programme/Volume / AV / Standby-On selection
switch
The Control button allows you to control the Volume/
Programme/ Source and Standby-On functions of
the TV.
To turn the TV on: Press the middle of the button.
To change volume: Increase the volume by pushing
the button up. Decrease the volume by pushing the
button down.
To change channel: Press the middle of the button,
the channel information banner will appear on screen.
Scroll through the stored channels by pushing the
button up or down.
To change source: Press the middle of the button
twice, the source list will appear on screen. Scroll
through the available sources by pushing the button
up or down.
To turn the TV off: Press the middle of the button and
hold it down for a few seconds, the TV will turn into
standby mode.
English - 8 -