Connect Power; Specifications - JVC LT-32V250 Instructions Manual

Inserting the Batteries into the Remote
Remove the screw that secure the battery compartment
cover on the back side of the remote control first. Lift
the cover gently. Insert two AAA batteries. Make sure
the (+) and (-) signs match (observe correct polarity).
Place the cover back on. Then screw the cover back
on again.
Batteries should not be exposed to excessive heat
such as sunshine, fire or the like.

Connect Power

IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket. After unpacking, allow
the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.
Antenna/Cable Connection
Connect the "aerial" or "cable TV" plug to the AERIAL
INPUT (ANT) socket located on the back of the TV.

Specifications

TV Broadcasting
Receiving Channels
Number of Preset
Channels
Channel Indicator
RF Aerial Input
Operating Voltage
Audio
Audio Output Power
(WRMS.) (10% THD)
Power Consumption
Weight (kg)
TV Dimensions WxHxD
(with stand) (mm)
TV Dimensions WxHxD
(without stand) (mm)
Operation temperature
and operation
humidity:
English - 9 -
PAL B/G D/K I
VHF (BAND I/III) - UHF
(BAND U) - HYPERBAND
1000
On Screen Display
75 Ohm (unbalanced)
220-240V AC, 50Hz.
German+Nicam Stereo
2 x 6 W
65W
with stand without stand
5,05 kg 4,90 kg
735 x 478 x 185
735 x 438 x 77/97
0ºC up to 40ºC, 85%
humidity max