Kyocera ECOSYS M2235dn Operation Manual page 246

Setup and Registration (System Menu) > System Menu
Item
eSCL over SSL
*1 The setting will be changed after restarting the device or network.
*2 Set "SSL" to [On] in Secure Settings.
Secure Settings (page 8-12)
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Secure Settings
Item
SSL
Ping
Item
Ping
Restart Network
Item
Restart Network
I/F Block Set.
[System Menu/Counter] key > [▲] [▼] key > [System/Network] > [OK] key > [▲] [▼] key > [I/F Block Set.] > [OK] key
This allows you to protect this machine by blocking the interface with external devices such as USB hosts.
Item
USB Host
USB Device
USB Storage
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Security Level
[System Menu/Counter] key > [▲] [▼] key > [System/Network] > [OK] key > [▲] [▼] key > [Security Level] > [OK] key
Selects whether to receive scanned documents using eSCL over SSL.
Value: Off, On
Select whether or not to use SSL.
Value: Off, On
Checks if communication with the destination by entering the host name or IP address of the
destination is possible.
Restarts the network.
This locks and protects the USB host.
Value: Unblock, Block
This locks and protects the USB interface connector (USB Device).
Value: Unblock, Block
This locks and protects the USB memory slot.
Value: Unblock, Block
NOTE
This function is available when USB Host is set to [Unblock].
8-12
Description
Description
Description
Description
Description
*1, *2