Kyocera ECOSYS M2235dn Operation Manual page 244

Setup and Registration (System Menu) > System Menu
Item
SMB
SNMP
SMTP
POP3
RAW Port
LPD
IPP
IPP Over SSL
HTTP
HTTPS
LDAP
ThinPrint
Thin Print over SSL
Select whether to send documents using SMB. When selecting [On], set the SMB default Port
Number. The default port number is 445.
Value: Off, On (Port Number: 1 to 65535)
Select whether to communicate using SNMP.
Value: Off, On
Select whether to send E-mail using SMTP.
Value: Off, On
Select whether to receive E-mail using POP3.
Value: Off, On
Select whether to receive documents using Raw Port.
Value: Off, On
Selects whether to receive documents using LPD.
Value: Off, On
Selects whether to receive documents using IPP. To use the IPP protocol, select [Not Secure
(IPP&IPPS)] on IPP Security under Security Settings from the Command Center RX. The
default port number is 631.
Value: Off, On (Port Number: 1 to 32767)
Select whether or not to use IPP over SSL.
Value: Off, On (Port Number: 1 to 32767)
NOTE
When selecting [On], it also requires a certificate for SSL. the default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Select whether to communicate using HTTP.
Value: Off, On
Select whether to communicate using HTTPS.
Value: Off, On
Select whether to use LDAP.
Value: Off, On
Select whether to use ThinPrint. To use the Thin Print protocol, set the protocol to [On]. The
default port number is 4000.
Value: Off, On (Port Number: 1 to 32767)
NOTE
This function is displayed only when the optional ThinPrint Option is activated.
To use the Thin Print over SSL protocol, set [Thin Print Over SSL] to [On].
Value: Off, On
NOTE
• This function is displayed when [ThinPrint] is set to [On].
• When selecting [On], it also requires a certificate for SSL. The default certificate is the self-
certificate of the machine.
Command Center RX User Guide
8-10
Description
*1
*1
*1
*1, *2
*1
*1, *2
*1, *2
*1
*1, *2