Connecting To A Pc With Hdmi - Sceptre U508CV-UMKR Manual

Connecting to a PC with HDMI...

1. Make sure the power of UHD display and your PC is turned off.
2. Obtain a HDMI 2.0 cable; connect to the HDMI output of your PC and
the other end to the HDMI 1 port on the back of your UHD display.
3. Turn on the power of the UHD display and your PC.
Use the remote control's source button or the source button on the
4.
display to switch to HDMI1.
5. Change your PC resolution to 3840 x 2160 at 60 Hz refresh rate.
Please Note:


For the best results, please set your PC resolution to 3840 x
2160 at 60 Hz. Please refer to the PC or graphic card's
manual for further instructions on how to set your resolution
and refresh rate.
Please refer to your PC manual for video output requirements
of the video card.
- 21 -
www.SCEPTRE.com
SCEPTRE U50 Series UHD TV User Manual