Connecting A Digital Audio Receiver With Optical Spdif - Sceptre U508CV-UMKR Manual

Connecting a Digital Audio Receiver with Optical SPDIF...

1. Make sure the power of UHD display and your receiver is turned off.
Obtain an optical SPDIF cable; connect it to your receiver's optical SPDIF
2.
digital input and the optical SPDIF connection on the SPDIF port on the back
of the UHD display.
3. Turn on the UHD display and your receiver.
Please Note:

If you want pure digital stream for your receiver to decode, you
must also configure the display's OSD Sound->Digital Audio Out
function. Make sure the option is on 5.1CH.

If your receiver is making static noises when receiving 5.1CH, you
must use the PCM option instead.

Please reference the receiver's manual as well, to make sure the
receiver is configured to receive signals correctly from the display.

The display's SPDIF out for 5.1CH is ONLY used for
antenna/cable connection. Any other incoming audio signal
will be passed out of SPDIF in PCM format.
- 22 -
www.SCEPTRE.com
SCEPTRE U50 Series UHD TV User Manual