Connecting To A Pc With Hdmi - Sceptre U550CV-UMC Manual

Connecting to a PC with HDMI...

1. Make sure the power of UHD display and your PC is turned off.
2. Obtain a HDMI 2.0 cable; connect to the HDMI output of your PC and
the other end to the HDMI 1 port on the back of your UHD display.
3. Turn on the power of the UHD display and your PC.
4. Use the remote control's source button or the source button on the
display to switch to HDMI1.
5. Change your PC resolution to 3840 x 2160.
Please Note:
For the best results, please set your PC resolution to
•
3840 x 2160. Please refer to the PC or graphic card's manual
for further instructions on how to set your resolution and
refresh rate.
Please refer to your PC manual for video output requirements
•
of the video card.
- 22 -
www.SCEPTRE.com
SCEPTRE U Series CV-UMC UHD TV User Manual