Sceptre U550CV-UMC Manual page 51

Problems
WEAK SIGNAL OR
NO PROGRAM
SYMBOL ON
SCREEN
DISPLAY'S
UNIVERSAL
REMOTE CODE
TV CHANNELS ARE
BLOCKED
UNIVERSAL
REMOTE CODE
THE DISPLAY
TURNS ON OR OFF
SLOWLY AND THE
SCREEN SHOWS
UP SLOWLY
HDCP VIDEO SAYS
NO HDCP SUPPORT
PICTURE IS
DISTORTED OR
HAS ABNORMAL
SOUND
PICTURE DOES
NOT COVER THE
ENTIRE SCREEN
PICTURE QUALITY
IS HORRIBLE!!
PICTURE HAS
PIXELS THAT ARE
ALWAYS
DISPLAYING THE
SAME COLOR
I CANNOT CHANGE
THE TIME
MANUALLY
The display's tuner signal must not be lower than 65 %. Check
your signal.
The display's tuner signal must not be lower than 65 %.
Change the direction of your antenna and rescan your
channels. If you have cable call up your cable company and
ask about signal strength of your local cable.
This television follows SONY's universal remote code. To
find the actual code you must read through your own
universal remote's guide book.
Check your auto lock function's settings inside the OSD. You
may have locked up some channels but forgot about them.
Refer to page 36 for more instructions.
This display follows SONY's universal remote code. Please
check your hand book for SONY's codes then apply them.
This display is an Ultra High Definition liquid crystal display
panel. It requires a few more seconds than normal TVs to
power up and show the picture.
Reboot your HDCP video device but turning them off and
unplugging the power cord. Wait up to 8 minutes to plug the
power back in to see if it works or not.
This might be from interference from large electrical appliances,
cars, motorcycles, or fluorescent lights. If the display is close to
the wall, try moving the display to another room in your house
to see if the problem still occurs.
If you're using HDMI or a TV digital channel make sure you use
the ASPECT button to switch to 16:9 format. If you are using
VGA, use the AUTO ADJUST function to adjust to the screen.
Please Note: If you are using regular analog TV, AV, or
component in 480i resolution, use the ASPECT button to switch
to 16:9 in order to fill up the screen. Please Note: This note this
feature will distort the picture.
For best image quality, view HD widescreen programs where
possible. If HD content is not available view "Standard
Definition" from a digital source. Standard, analog TV will
always be noticeable inferior to HD because your display has
video that is many times better than old TV's and so you can
see interference and deficiencies you did not KNOW you had.
Your display is manufactured using an extremely high level of
precision technology, however, sometimes some pixels of your
display may not display. Pixels defects within industry
specifications are inherent to this type of product and do not
constitute a defective product.
Your display syncs time automatically according to your local
TV channel. This function only works while the display's tuner
is connected to an ANTENNA.
- 51 -
www.SCEPTRE.com
SCEPTRE U Series CV-UMC UHD TV User Manual
Solutions