Table of Contents
Advertisement
Quick Links
Safety Instructions & Operator's Manual for
21" VARIABLE SPEED
REAR DISCHARGE
WALK BEHIND
MOWER
Models
BTPV21675E (7800268)
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained engine power will likely be lower due to operating limitations and environmental factors. Please refer to 'Engine Power Rating Information' for
further details.
Manual No. 7101725 (I.R. 12/12/2007)
Jefferson, WI 53549
TP 100-5295-IR-WB-J
Advertisement
Table of Contents
Related Manuals for Briggs & Stratton BRUTE BTPV21675E
Summary of Contents for Briggs & Stratton BRUTE BTPV21675E
- Page 1 Safety Instructions & Operator's Manual for 21” VARIABLE SPEED REAR DISCHARGE WALK BEHIND MOWER Models BTPV21675E (7800268) NOTE: Specifications are correct at time of printing and are subject to change without notice. * Actual sustained engine power will likely be lower due to operating limitations and environmental factors. Please refer to ‘Engine Power Rating Information’ for further details.
- Page 2 Thank You for purchasing this quality-built Brute product. We’re pleased that you placed your confidence in the Brute brand. When operated and maintained according to the instructions in this manual, your Brute product will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with the machine and how to avoid them.
-
Page 3: Table Of Contents
Table of Contents Operator Safety ..........2 Important Operator Safety Instructions . -
Page 4: Operator Safety
IMPORTANT OPERATOR SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. - Page 5 IMPORTANT OPERATOR SAFETY INSTRUCTIONS (Continued) SAFE HANDLING OF GASOLINE OPERATION (Continued From Previous Page) (Continued From Previous Column) 7. Remove gas-powered equipment from the vehicle or 14. DO NOT discharge material against a wall or trailer and refuel it on the ground. If this is not possible, obstruction.
-
Page 6: Features And Controls
IMPORTANT The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your dealer if you have questions. Features and Controls Oil Fill Cap and Dipstick Blade Control Fuel Filler Cap Rope Start Handle Recycling Cover Drive Wheel Control... -
Page 7: Operation
Pre-Start Check List Starting and Operation Make the following checks and perform the service required Engine and Blade before each start-up. 1. Pull the blade control (A, Figure 3) against the handle. 1. Check the guards, deflectors, grass bag, and covers to 2. -
Page 8: Propelling Mower
Starting and Operation (Continued) Handle Height Adjustment Propelling the Mower The height of the mower handle can be adjusted as follows: 1. Remove the wingnuts (A, Figure 5), washers (not 1. Start the engine. Refer to the Section entitled “Starting shown), and bolts (B) from the right and left handle and Operation –... -
Page 9: Cutting Height Adjustment
WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. 1.0 in 3.5 in Cutting Height Adjustment... -
Page 10: Installing The Discharge Deflector
Installing the Grass Bag WARNING 1. Raise the rear discharge door (A, Figure 12). DO NOT attempt any maintenance, adjustments or service 2. Remove the recycling plug. Refer to the section entitled with engine and blade running. STOP engine and blade. “Removing the Recycling Plug”. -
Page 11: Maintenance
Maintenance - Introduction Check Mower Blade 1. Disconnect the spark plug wire and secure the end away To retain the quality of the mower, use genuine BRUTE from the plug. replacement parts only. Contact a local BRUTE dealer for 2. Tilt the mower up on its rear wheels for access to the parts and service assistance. -
Page 12: Wheel Drive Components
WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. -
Page 13: Mower Blade Replacement
3. Remove the blade (B, Figure 17). WARNING DO NOT attempt any maintenance, adjustments or service Make sure that with engine and blade running. STOP engine and blade. blade hub is seated Disconnect spark plug wire and secure away from spark between flanges plug. -
Page 14: Wheel Drive Control Adjustment
3. Fully engage the lever, and measure the length of the WARNING extended spring. The overall spring length should DO NOT attempt any maintenance, adjustments or service increase by 0.020 – 0.025”. with engine and blade running. STOP engine and blade. 4. -
Page 15: Belt Service
Engine Drive Belt Replacement WARNING 1. Empty the fuel tank. DO NOT attempt any maintenance, adjustments or service 2. Remove the blade (A, Figure 22). Refer to the Section with engine and blade running. STOP engine and blade. entitled “Blade Sharpening”. Disconnect spark plug wire and secure away from spark 3. -
Page 16: Battery Service
Battery Testing WARNING Check the battery’s state of charge using a voltmeter. DO NOT attempt any maintenance, adjustments or service Remember to hook the positive lead to the battery’s positive with engine and blade running. STOP engine and blade. terminal, and the negative lead to the negative terminal. Disconnect spark plug wire and secure away from spark Check the reading against the chart below. -
Page 17: Rear Cover Removal & Installation
WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Rear Cover Removal and Installation To Remove the Rear Cover 1. -
Page 18: Service Schedule
Service Schedule ITEM SERVICE REF. EACH EACH PERFORMED SEASON Engine Oil Check Oil Level Page 5 Initial Oil Change Page 9 Periodic Oil Change Page 9 Air Pre-Cleaner Clean Sponge Element Engine Manual Air Cleaner Clean or Replace Engine Manual Spark Plug Replace Engine Manual... -
Page 19: Troubleshooting
Troubleshooting PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Engine Will Not Start 1. Fuel tank empty. 1. Fill fuel tank with fresh fuel. Using Recoil Starter 2. Engine needs priming. 2. Prime. Check Engine Manual for Instructions. 3. Spark plug wire disconnected. 3. -
Page 20: Warranty
BRUTE Two Year Limited Warranty Brute warrants to the original purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of two (2) Years from the date of purchase; however, this warranty does not cover engines, accessories (such as snow blowers, snow blades, grass baggers and plows), transmissions, batteries and Normal Wear Parts (except as noted below) or transaxles as the companies that manufacture these items furnish their own warranties and provide service through their authorized field service facilities. - Page 22 Notes www.brutepower.com...
- Page 23 Notes...
- Page 24 21” VARIABLE SPEED REAR DISCHARGE WALK BEHIND MOWER Product Specifications Common Service Parts Part Number Blade Control Cable 7101872 Deck Size (in) Height of Cut (in) 1.0 - 3.5 Wheel Drive Control Cable 7101398 Transmission Type Variable Speed/Gear Cutter Blade (Double Wave) 7100242 Ground Speed (mph) 0 - 4.2...