Protection Systems - Honeywell G0062610 Owner's Manual

Automatic standby generator
Hide thumbs Also See for G0062610:
Table of Contents

Advertisement

Available languages

Available languages

EXHAUST
ENCLOSURE
Figure 2-3: GT-990/GT-999 Engines, 13-20kW Unit
2.2 — Protection Systems
The generator may have to run for long periods of time with no operator present to monitor the engine/generator conditions. Therefore, the gen-
erator is equipped with a number of systems to automatically shut down the unit to protect it against potentially damaging conditions. Some of
these systems are as follows:
Low Oil Pressure Sensor
High Temperature Sensor
Overcrank Sensor
Overspeed Sensor
RPM Sensor
The control panel contains a display which alerts the operator when a fault condition occurs. The above list is not all inclusive. For more informa-
tion about alarms and control panel operation, see Section 3 Operation.
6
OIL
DIPSTICK
COMPOSITE BASE
OIL FILTER
DATA LABEL
(SEE SAMPLE)
AIR FILTER
BATTERY COMPARTMENT
OIL FILL CAP
Under-frequency Sensor
Undervoltage Sensor
Overvoltage Sensor
Internal Failure Sensor
Low Battery Voltage Alarm
Automatic Standby Generator Owner's Manual
CONTROL
PANEL
CIRCUIT
BREAKERS
FUEL
INLET
(BACK)
FUEL
REGULATOR

Advertisement

Table of Contents
loading

Table of Contents