Magnavox 32MV306X Owner's Manual page 29

You can set a Particular Picture Quality using Advanced settings.
Auto picture Color alignment
Backlight Noise reduction
Contrast Black stretch
Brightness Dynamic contrast
Color Gamma
Tint BMR 120
Sharpness MPEG artifact reduction
Advanced settings Color enhancement
Picture format Custom color management
Mode selection Film mode
to set the color temperature to Personal,
Cool, Normal and Warm.
Mode
When you adjust the following settings,
Personal will be set automatically.
to Decrease Red
Red gain
Contrast
to Decrease Green
Color
Green gain
Contrast
alignment
to Decrease Blue
Blue gain
Contrast
to Decrease Red
Red offset
Brightness
Green
to Decrease Green
offset
Brightness
to Decrease Blue
Blue offset
Brightness
Noise to Select the desired setting, then press OK
reduction
(Off, Minimum, Medium and Maximum)
Black to Select the desired setting, then press OK
stretch
(Off, Minimum, Medium and Maximum)
Dynamic to Select the desired setting, then press OK
contrast
(Off, Minimum, Medium and Maximum)
to Select the desired setting, then press OK
Gamma
(Very Dark Room, Dark Room, Normal, Bright
Room and Very Bright Room)
to Set BMR 120 (Brilliant Motion Rate) to
Off
Off
BMR 120
On
to Make the Video appear smoother
MPEG
to Select the desired setting, then press OK
artifact
(Off, Minimum, Medium and Maximum)
reduction
Mode
Red gain
Green gain
Blue gain
Red offset
Green offset
Blue offset
Cursor I Cursor H
to Increase Red
Contrast
to Increase Green
Contrast
to Increase Blue
Contrast
to Increase Red
Brightness
to Increase Green
Brightness
to Increase Blue
Brightness
Off
Color to set color enhancement to Off
enhancement
On
to make colors more vivid and bright
to Select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
to rotate only
selected color tint
Tint
Custom
in clockwise
color
direction
management
to decrease color
Saturation
with only selected
color
to decrease
Brightness
brightness with
only selected color
Off
to set film mode to Off
Film mode
to optimize the picture recorded by the
Auto
original film
Note(s)
Mode selection is available only if
●
the external Input modes are selected HDMI 1 or HDMI 2.
–
the connected HDMI device is outputting a video signal.
–
Cursor H Cursor I
to rotate only
selected color tint
in
counterclockwise
direction
to increase color
with only selected
color
to increase
brightness with
only selected color
Continued on next page.
29 .
English