Need Help - Philips SRP4004/53 User Manual

How do I set the remote control for combo devices
(TV / VCR, TV / DVD, DVD / VCR, etc)?
Some combo devices require you to set up two different
source selection buttons to control both parts of the combo
device. For example, if you have a TV / DVD combo, you
might need to set up the remote control for both TV and
DVD to operate your TV / DVD combo.
4.1.2 Operation
The remote control does not wake up anymore.
Battery level too low or battery lifetime came to an end.
• R eplace the batteries. For this see chapter 2.1.
After replacing the batteries, test if the remote control
still operates your devices. If it does not, you have to set
up the remote control again. For this refer to chapter 2.2.
The device I want to operate does not respond at all /
does not respond to all of the button commands.
• C heck if the buttons you press are available on the
original remote control of the device.
• T ry improving buttons. See chapter 2.2.2.
Wrong code selected during setup.
• S et up the remote control again for the device. Always
test if the device responds, before leaving setup mode.
It may be that the buttons that you are trying to use have a
different naming on the original remote control.
• T ry out all buttons to find the one(s) you need.
The Teletext buttons do not work.
• Find out whether your TV is equipped with Teletext.
• T ry improving the Teletext buttons. See chapter 2.2.2.
• C heck whether you are using the correct buttons to
switch on Teletext. For TV this is the
this is the button.
EN
12
button; for STB
4.1.3 Batteries
Will my settings be deleted when I replace the batteries?
No. All user settings will be retained in the remote control
memory for 5 minutes.
Warning
The batteries should not be exposed to excessive heat
such as sunshine, fire or the like.
4.2 Need help?
We advise you to first read this user manual carefully. It is
provided to help you set up and use the remote control.
If, however, you require extra information or have additional
questions about setup, usage, spare parts, warranty, etc. of the
SRP4004, you can always contact us.
When calling our helpline, make sure to have the SRP4004
at hand when you call, so that our operators can help you
determine whether the SRP4004 is working properly.
You will find our contact details at the end of this user
manual.
The model number of your Philips universal remote control
is SRP4004/53.
Date of purchase:
......../ ......../ ........
(day/month/year)
For online support go to: www.philips.com/welcome.
• Click 'Support' and follow the on-screen instructions.
EN
13