Ipv6 Settings - TRENDnet TEW827DRUV2 User Manual

TRENDnet User's Guide

IPv6 Settings

Advanced > Setup > IPv6 Settings
IPv6 (Internet Protocol Version 6) is a new protocol that significantly increases the
number of available Internet public IP addresses due to the 128-bit IP address structure
versus IPv4 32-bit address structure. In addition, there are several integrated
enhancements compared to the most commonly used and well known IPv4 (Internet
Protocol Version 4) such as:

Integrated IPsec – Better Security

Integrated Quality of Service (QoS) – Lower latency for real-time applications

Higher Efficiency of Routing – Less transmission overhead and smaller routing
tables

Easier configuration of addressing
Note: In order to use IPv6 Internet connection settings, it is required that your ISP
provide you with the IPv6 service. Please contact your ISP for availability and more
information about the IPv6 service.
1. Log into your router management page (see
on page 10).
2. Click on Advanced and click on Setup, then click on IPv6 Settings.
.
© Copyright 2017 TRENDnet. All Rights Reserved.
"Access your router management page"
3. Review the IPv6 Internet Connection settings and enter information settings specified
by your ISP. To save changes to this section, click Save when finished. Commit your
changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and
click Apply & Reboot.
Note: Please contact your ISP for IPv6 service availability.
Select the IPv6 connection type provided by your ISP.

Static IPv6

Auto-configuration (SLAAC/DHCPv6)

PPPoE

6to4

Link-Local Only
TEW-827DRU
32