Brother TD-4550DNWB User Manual page 33

appears on the LCD.
• Using a Windows computer:
a. Launch the Printer Setting Tool on your computer.
b. Click the Communication Settings button.
c. Click General > Communication Settings.
d. Confirm the Infrastructure and Wireless Direct or Wireless Direct option is selected for the
Selected Interface setting, and then confirm the Wireless Direct tab.
e. Click Apply to set the printer to Wireless Direct mode.
f. Exit the Printer Setting Tool.
3. Use your computer to select the SSID of your printer. Make sure your computer and the printer are connected
via wireless connection.
The printer must be added to the computer. Follow the on-screen instructions to add the printer.
• The default SSID and password are as follows:
- SSID: "DIRECT-*****_TD-4550DNWB" where ***** is the last five digits of the product serial number.
- Password: 455***** where ***** is the last five digits of the product serial number.
• The Communication Settings menu in the Printer Setting Tool also allows you to apply the network
settings changes to multiple printers.
• You cannot connect to the Internet on your computer via Wi-Fi while using Wireless Direct.
If your printer is connected successfully,
WPS (Wi-Fi Protected Setup
If your wireless access point/router supports WPS, wireless settings and connections can be configured quickly.
1. Confirm that your wireless access point/router has the WPS symbol.
2. Place your printer within the range of your wireless access point/router.
The range may differ depending on your environment. See the instructions provided with your wireless
access point/router.
3. Press Menu.
4. Press a or b to select the following:
a. Select [WLAN]. Press OK.
b. Select [WPS Button Push]. Press OK.
You can also configure the setting using the PIN code by selecting [WPS PIN Code]. For more
information, see the instructions provided with your wireless access point/router.
5. Press a or b to select [Start]. Press OK.
6. Press the WPS button on your wireless access point/router.
When the connection is established, the WLAN icon appears on the printer's LCD.
• Computers on the same network as the printer have access to the printer.
• Your printer tries to connect using WPS for two minutes. If OK is pressed during that time, the printer
continues trying to connect for an additional two minutes.
Related Information
• Connect the Printer to a Computer
changes to
™
)
.
29