Brother TD-4550DNWB User Manual page 161

Level 1 Level 2
Menu Security -
[Wired LAN]
Level 1 Level 2 Descriptions
TCP/IP Settings -
Wired LAN Status -
[WLAN]
Level 1
WLAN (On/Off)
Network Mode
WPS Button Push
WPS PIN Code
Infra Manual Setup
Direct Manual Setup -
TCP/IP Settings
WLAN Assistant
WLAN Status
[Bluetooth]
Level 1
Bluetooth (On/Off)
Mode
Print Barcode
Automatic Reconnection -
Clear History
Bluetooth Status
[Media]
Level 1 Level 2 Descriptions
Selection -
Calibration -
Detection -
Descriptions
If the Menu Locks are set, a lock icon is displayed for parameters that cannot
be selected.
Select whether a passcode is required to enter the Administration mode. When
set to on, specify the four-digit password.
Specify TCP/IP settings.
Display the Wired LAN status.
Level 2
-
-
-
-
-
-
-
Infrastructure Mode Display the WLAN status.
Direct Mode
Level 2 Descriptions
- Turn the Bluetooth function on or off.
- Select the Bluetooth mode.
- Print the Bluetooth address and corresponding barcode.
Switch to Automatic Reconnection mode (only for Apple devices: iPad,
iPhone, or iPod touch).
- Delete information for auto re-paired devices registered in the printer.
- Display the status of the Bluetooth function.
Select the paper size and paper type.
Detect the size of the set paper.
Detect the width of the set paper. Display paper settings in the Selection option that
match the detection results from the paper settings registered with the Printer Setting Tool.
Descriptions
Turn the WLAN function on or off.
Select the network mode when you set the WLAN function to
on.
Try to connect to a nearby wireless access point/router.
Display the printer's eight-digit PIN.
Display the SSID of a nearby wireless access point/router.
After you select the SSID and press OK, the password entry
screen appears.
Manually enter the SSID and password of a wireless access
point/router to connect.
Specify TCP/IP settings.
Use the WLAN connection assistant function to configure your
wireless network settings.
157