Toshiba RAS-M05J2KVSG-E Service Manual page 75

No. Part name
5
Fan motor 1) Follow the procedure item 3 and 4 .
2) Loosen the set screw of the cross flow fan.
3) Remove 2 fixing screws of the motor band.
4) Pull the motor band and the fan motor
<To re-installation>
- Check the type name of fan motor.
- Keep connector position and arrange fan
6 Horizontal louver 1) Remove shaft of the horizontal louver
Procedures
Cross flow fan
3.5 mm
Set screw
outward.
motor wires follow figure.
Fan motor wires
For SJM-240-25
from the back body. (First remove 2 the
center shafts then remove the other shafts.)
Body back
Fan motor
Screws
Fan motor
connector
- 75 -
Remarks
Cross flow fan
Vertical louver
Hexagon screw driver
Motor band
Fan motor
Drain pan
Horizontal louver