Toshiba RAS-M05J2KVSG-E Service Manual page 67

(For AC fan motor)
<Inspection procedure>
1. Remove the front panel. (Remove 2 screws.)
2. Remove the cover of the fan motor lead wires.
3. Check AC voltage with CN10 connector while the fan motor is rotating.
NOTE :
• Using a tester, measure the resistance value of each winding coil.
• Use a thin test rod.
• Do not disconnect the connector while the fan motor is rotating.
• For P.C. board side, proceed to the item "Only indoor fan does not operate"
of "Judgment of Trouble by Every Symptom".
WHI
5
CN10
BLK
3
RED
1
BRW
3
GRY
CN11
2
YEL
1
P.C. board
Position (P.C. board)
Between (Black) -
3
Between (Black) -
3
Between (Red) -
1 5
3 3
5 5
1 1
3 3
2 2
1 1
Resistance value
(Red)
1
(White)
5
(White)
120.6 ± 8.4 Ω
244.2 ± 17 Ω
364.8 ± 25.5 Ω
- 67 -