Manually adjust picture settings
Picture
Picture
Smart picture
Sound
Reset
EasyLink
Contrast
Preferences
Brightness
Factory settings
Colour
Reinstall TV
Sharpness
Noise reduction
Tint
1. Press
.
2. Select [Setup] > [TV settings] > [Picture],
then press OK.
3. Select one of the following settings, then
press OK.
[Smart picture]: Access predefined
•
smart picture settings.
[Reset]: Reset to factory default
•
settings.
•
[Contrast]: Adjust the intensity
of backlight areas, while the video
contents are kept unchanged.
[Brightness]: Adjust the intensity and
•
details of dark areas.
•
[Colour]: Adjust colour saturation.
[Sharpness]: Adjust sharpness in the
•
image.
[Noise reduction]: Filter and reduce
•
noise in an image.
•
[Tint]: Adjust the colour balance in an
image.
[Custom tint]: Customise tint setting.
•
(Only available if [Tint] > [Custom] is
selected)
[Smart Video]: Fine-tune each pixel to
•
match surrounding pixels. This setting
produces a brilliant, high-definition
image.
• [Advance sharpness]: Enable
superior picture sharpness.
• [Dynamic contrast]: Enhance
contrast. [Medium] setting is
recommended.
• [Dynamic backlight]: Adjust
brightness of the TV backlight to
match lighting conditions.
• [MPEG artifact reduction]: Smooth
out transitions on digital pictures.
You can switch this feature on or
off.
• [Colour enhancement]: Make
colours more vivid and improve the
details in bright colours.
• [Gamma]: Adjust the midtone
intensity in the picture. Black and
white are not affected.
•
[PC mode]: Adjust the picture when a
PC is connected to the TV via HDMI
or DVI.
[Picture format]: Change the picture
•
format.
•
[Screen edges]: Adjust the viewing
area. (when set to maximum, you may
see noise or the rough edge of an
image).
[Picture shift]: Adjust the picture
•
position for all picture formats except
for [Auto zoom] and [Wide screen].
EN
19