Table of Contents
Advertisement
SRM-2620T
3.
Insert one end of trimmer line
into an eyelet, and push line
equal distance through trimmer
head.
4.
Hold trimmer head while
turning knob clockwise to wind
line onto spool until about 13
cm (5 in.) of each line remains
exposed.
Trimmer head is now fully loaded
and ready for operation.
When the wear indicators
located at the bottom of the
Speed-Feed® head are worn
smooth, or if holes appear,
replacement of the cover or the
entire Speed-Feed® head is
required.
X7502341801
© 03/2019 ECHO Inc.
MAINTENANCE
41
Advertisement
Table of Contents
