Table of Contents
Advertisement
If you enter an incorrect PIN code three times
in succession, your SIM card will be locked. To
unlock it, you must obtain the PUK code from
your network operator.
Charge the battery
Your phone is powered by a rechargeable battery.
A new battery is partially charged and a sound alert
will warn you when the battery reaches low. Once
you have installed the battery, you can start
charging the phone.
Plug in the charger connector as shown below.
Then plug the other end into a mains AC power
socket.
During charging, the charge indicators will scroll. It
takes around 3 hours to fully charge the battery.
When all the scroll bars are steady, the battery is
Getting Started
fully charged. You can then disconnect the charger.
Keeping the charger plugged to the mobile
phone when the battery is fully charged will not
damage the battery. The only way to turn off the
charger is to unplug it, so use an easily accessible
AC power socket.
Insert Micro-SD card
You can expand the memory of your phone by
adding a micro-SD card.
Supported capacity: 2G
1. Open the micro -SD card slot as shown
below.
2. Insert the micro-SD card into the micro-SD
card slot, with golden contacts facing
downwards.
7
Advertisement
Table of Contents
