Audio Input Select; Onscreen Display - Panasonic th-49lf8w Operating Instructions Manual

Audio input select

Set up the sound when a video input is selected.
1
Select the video input with
Set the audio input with
Audio input select
HDMI1
HDMI2
DIGITAL LINK
DVI-D
PC
COMPONENT
VIDEO
Video input
HDMI1
HDMI2
DIGITAL LINK*
1
DVI-D / PC /
COMPONENT* /
2
VIDEO
No audio: No audio input (Mute)
1: [DIGITAL LINK] is displayed for LF80 series only.
*
2: [COMPONENT] may be displayed as [RGB]
*
depending on he settings of [Component/RGB-in
select]. (see page 44)
When the setting for the audio input has been
changed from the factory settings, the audio input is
displayed as below.
HDMI1
16:9
AUDIO1 IN

Onscreen display

Set to display / hide he following Onscreen display.
●
Power on display
●
Input signal switch display
● No signal display
● MUTE display after displaying he menu screen
●
MUTE and off timer remaining time display after
<RECALL> is pressed
●
Off timer remaining time display when 3 minutes
remaining
[On]:
Displays the Onscreen display.
[Off]:
Hides he Onscreen display.
.
.
HDMI1
HDMI2
DIGITAL LINK
AUDIO1 IN
AUDIO1 IN
AUDIO2 IN
AUDIO2 IN
Audio input
HDMI1 / AUDIO1 IN /
AUDIO2 IN / No audio
HDMI2 / AUDIO1 IN /
AUDIO2 IN / No audio
DIGITAL LINK / AUDIO1 IN /
AUDIO2 IN / No audio
AUDIO1 IN / AUDIO2 IN /
No audio
Initial input
Adjusts the input signal when the unit is turned on.
[Off] / [HDMI1] / [HDMI2] / [DIGITAL LINK]*
[DVI-D] / [PC] / [COMPONENT]*
1: [DIGITAL LINK] is for LF80 series only.
*
2: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 44)
Note
● This menu is available only when [Input lock] is [Off].
(see page 64)
Initial VOL level
Adjusts the sound volume level when the unit is turned
on.
[Off]:
It will be the sound volume level which had been set
before the power of the unit was turned off.
[On]:
Sets your preferred volume.
● You can hear the changed volume regardless of your
volume setting before opening the [Options] menu if
you adjust the volume when [Initial VOL level] is [On]
and cursor is on he menu.
■
To adjust sound volume level
Press <VOL +> <VOL ->.
Note
●
When [Maximum VOL level] is [On], the volume
can only be adjusted between 0 and your maximum
range.
/
1
/ [VIDEO] / [USB]
2
63
English