Philips SE2752B/51 User Manual page 35

4
Enter the new PIN code, then press [OK]
to confirm.
5
Enter the new PIN code again, then press
[OK] to confirm.
» The setting is saved.
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1
Press MENU.
2
Select [ANSWER MACHINE] >
[SETTINGS] > [REMOTE ACCESS],
then press [OK] to confirm.
3
Select a new setting, then press [OK] to
confirm.
» The setting is saved.
Access the answering machine
remotely
1
Make a call to your home number with a
touch tone phone.
2
Enter # when you hear the
announcement.
3
Enter your PIN code.
You now have access to your
»
answering machine, and you can now
listen to the new messages.
Note
•
You have 2 chances to enter the correct PIN
code before your phone hangs up.
4
Press a key to carry out a function. See
the Remote access commands table
below for a list of available functions.
Note
•
When there is no message, the phone hangs
up automatically if no key is pressed for 8
seconds.
Remote access commands
Key Function
1 Repeat the current or listen to
the previous message.
2 Listen to messages.
3 Skip to the next message.
6 Delete the current message.
7 Switch the answering machine
on.
(not available when you listen to
the messages).
8 Stop listening to the message.
9 Switch the answering machine
off.
(not available when you listen to
the messages).
EN
35