Base station (SE576) Charger Handset Base station (SE571) Power adapter Line cord User manual Quick start guide Guarantee Note In multi-handset packs, there are additional handsets, chargers and power adapters. In some countries, you have to connect the line adapter to the line cord, then plug the line cord to the telephone socket.
Connect Connect the base station Telephone Power Power socket socket socket Telephone base station Connect each end of the power adapter to: • the DC input jack at the bottom of the base station; • the power socket on the wall. Power Connect each end of the power adapter to (for multi-handset adapter...
Install Install the handset Charge 8 hours The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. Place the handset on the base station to charge the handset. When the handset is placed correctly on the base station, you hear the docking sound.
Check the battery level When the handset is off the base station/charger, the bars indicate the battery level (full, medium and low). When the handset is on the base station/charger, the bars keep scrolling until charging completes. The empty battery icon flashes and you hear an alert tone. The battery is low and needs recharging.
Enjoy Call • To make a call, press and dial the phone number. • To answer a call, press when the phone rings. • To end a call, press Adjust the earpiece volume Press to adjust the volume during a call. Add a contact in the phonebook [MENU] >...
Page 7
Listen to messages recorded on the answering machine (for SE576 only) Switch on/off the answering machine: Press Start/Stop listening to the recorded messages: Press Adjust the volume: Press Skip backward: When you listen to the messages, press message from the beginning. During the first second of the current message, to the previous message.